A-101 Pulse Vac

SKU: A-101 Category:

The A-101 Pulse Vac is unlike any other vacuum on the market today. The built-in air pulsation system continuously cleans the air filter, making it ideal for the removal of fine dust powders without clogging. It houses a 2 stage vacuum motor, making it one of the most powerful vacuums that operate on 120V. Your reduction in filter cleaning labor combined with its adaptability to all shrouded equipment.

The most essential and recommended vacuum by contractors today.

  • Built-in compressed air pulsation for continuous dust-free operation
  • High amp motor
  • Low center of balance prevents tip-overs
  • Easy to handle dump system
  • 120 Volt powered (220 Volt Optional)

Specification Sheet

Construction: Steel 16 Gallon Drum
Powder Coated Steel Body
Vacuum Hose: 1-1/2″ x 20′ (Model: A-101)
2″ x 15′ (Model: A-101-C)
Vacuum Motor: 120 Volts (13 Amp Draw) / 220 Volt (Optional)
Compressor: 120 Volt – 100 PSI
Height: 36″ (91cm)
Length: 29″ (74cm)
Width: 15″ (38cm)
Weight: 115 LBS (52kgs)
Wheels: 2 @ 8″ Rubber Wheels
2 @ 4″ Swivel Caster
Primary Filtration (Specially Designed Pleated Cartridge): #10129-H  Spun Bond W/PTFE Coating (Standard Filter in all BW Manufacturing, Inc. equipment):

SpunBond P.T.F.E., 70 pleats, 31 Sq. Ft media.

Efficiency of 99.7% @ .03 Microns (Minimum Efficiency Rating Value (MERV) 16 Rating – Out of the box)

 #10129-B Cellulose Paper/Polyester Blend Filter (Optional Replacement Filter)

80/20 Blend, 120 pleats, 53 Sq. Ft media.

Efficiency of 99.9% @ 1 Micron with a seasoned ( caked ) filter.

Secondary Filtration (Option): V-134-A Secondary Filter Housing
Secondary Filters (Specially Designed Pleated Cartridge): V-1078-B  Secondary Filter

99.7% Efficiency @ .05 Microns

V-1079-H Secondary HEPA Filter

99.995% Efficiency @ .03 Microns

Vacuum Chart

Model Port Size CFM Inches of Lift
A-101 (Electric) Sealed 0 120.0″
A-101 (Electric) 1 @ 1-1/2″ 110 19.0″
A-101 (Electric) 2 @ 1-1/2″ 56 Each Port 2.2″
A-101 (Electric) 1 @ 2″ 127 3.0″

All testing has been completed in a controlled environment at BW Manufacturing, Inc. using an air velocity meter and a magnehelic gauge measured at the neck of each vacuum.
These figures should be used as a reference only.