DG-50 Diamond Grinder/Polisher Attachment (for D-1800-FT4)

SKU: DG-50 Category: Tag:

The DG-50 Diamond Grinder/Polisher is unlike any other diamond grinder on the market today. What sets this floor grinder apart from all the others is the floating grinding heads and the specially designed shroud that keeps the machine virtually dust-free when connected to the D-1800 along with removing all material off the floor reducing clean up cost. The technology started with our DG-16 that developed into the DG-25 and now the DG-50 with four independent heads that give a grinding width of 50 inches. This is not a converted terrazzo grinder or wood sander. This machine was designed for coating removal to high gloss polishing on totally dry concrete.  With quadruple, one-piece 16” rubber mounted grinding heads (no planetary gears) that are adjusted up and down by air pressure, you have infinite adjustability. The diamond segments can easily be changed from course diamonds for coating removal to fine resin pads for polishing.

  • Leveling Uneven Concrete
  • Industrial Floors
  • Parking Decks
  • Coating Removal
  • Concrete Polishing

Chassis Specification Sheet

Optional Interchangeable Heads: BH-18 Shotblast Head
SC-16 Scarifier Head
DG-50 Diamond Grinder/Polisher Head
Tires: Non-Marking
Length: 115″ (292cm)
Width: 57″ (145cm)
Height: 60″ (152cm)
Weight: 4480 LBS (2032kgs)
Motor Options: John Deere Interim Tier IV Turbo Diesel 73hp
Drive: Hydrostatic
Compressor: 13 cfm Liquid Cooled
Vacuum: 2280 cfm
Steering: Power
Collector Capacity: 6.5 Cubic Feet (.184 Cubic Meters)
Minimum Aisle Width: 78″ (198cm) (Blastable Width)

Diamond Grinder/Polishing Head Attachment Specification Sheet

Production Capacity: 2500 to 5000 Square Feet Per Hour (232 to 464 Square Meters Per Hour)
Diamond Life (approx.): 12000 to 2800 Square Feet Per Hour (1115 to 2601 Square Meters Per Hour)
Cleaning Path: 50″ (127cm)
Weight: 900 LBS (408kgs)